CICLOSPORT CICLOPULS CP13is El Manual Del Propietario página 30

In order to correctly calculate ones personal CicloInZone, it
is necessary to firstly introduce personal information
regarding sex, weight, age and fitness level.
In order to calculate the CicloInZone position the chest belt
correctly, take up a rest position (remain seated and
relaxed) and start the CicloInZone calculation (using the
mode button after setting the fitness level).
The CP 13is heart rate monitor will then start a countdown
of 5 minutes. During this time, stay seated, relaxed and
calm, as the CP 13is will measure the minimum heart rate
reached during this period (heart rate at rest) and will store
this value for the subsequent calculation.
An acoustic signal will be heard after
the 5 minutes, indicating that the
calculation of the CicloInZone has
been completed. The display now
shows the lowest measured heart
rate within this 5 minutes.
After pressing the Mode button, the
calculated maximum heart rate
appears in the display.
Press again the Mode button and
the with CicloInZone calculated
30
personal upper heart rate limit
appears (this value can here – if
wanted – be changed using the Set
button).
Confirm this value with the Mode
button and the calculated lower
heart rate limit appears (this value
can here – if wanted – be changed
using the Set button).
Store using the Mode button and the
CP 13is is now ready for use.
Manual setting
of the heart rate limits
If the CicloInZone calculation is
switched off, the upper limit will flash
on the display (default value: 240
beats per minute).