Hauck Ecuador Instrucciones Para El Uso página 11

INStRUCtIoNS FoR USE
Part List (Photo 1):
Please check the list of parts to ensure that all parts have been delivered:
Stroller main frame
Seat unit
Stroller seat canopy
1 front bar
 rear wheels
 front wheels
INStRUCtIoN oF USE
1. UNFoLDING (fig. 1a-e)
Release the transportation lock of the stroller frame (1a). Grip the stroller handle by one hand,
and step on the basket tube bar by one feet, and stretch open the stroller (1b) until the locking
latches are securely locked in place (1c).
. FRoNt WHEEL ASSEMBLY (fig. a, b)
Push both front wheels into positions (a). Make sure the pushpin locks in place and cannot be
pull off. When changing the wheel, press the quick release button and pull the front wheel out
(b).
3. FRoNt WHEEL ADjUStMENt (fig 3)
Press 1 time down the swivel lock button, located on top of the front wheel, to lock the swivel
movement. to release the swivel movement, press 1 more time the swivel lock button.
4. REAR WHEEL ASSEMBLY (fig. 4a, 4b)
Slide the rear wheel into axle housing at the  sides of the rear axle bar. (4a).
When changing the wheel, press the metal pin down at the inner side of the rear leg and pull the
wheel out (4b)
5. BRAkE (fig. 5)
Press the rear brake down by foot to stop the rear wheels and push the stroller to check.
Attention: Always apply both brakes when parking the stroller.
6. INStALL tHE SEAt UNIt (fig 6a-6c)
Put the seat unit onto the stroller frame, push the side armrest adaptors into the plastic housings
on the stroller frame (6a). Ensure the seat unit is securely fixed on the stroller frame first before
putting your child in.
the seat unit can be fixed facing to the front position or reverses facing to the opposite position.
Simply squeeze the armrest buttons on the  sides of the seat unit up (6b), and pull the seat unit
out from the stroller frame, then you can reverse the seat position (6c).
Attention: Do not reverse the seat unit while your child is staying inside the seat.
7. ADjUStING tHE BACk RESt (fig. 7)
Pull the metal handle upwards and adjust the back rest to desired position. the back rest can be
altered to 3 different positions.
8. ADjUStING tHE LEG RESt (fig. 8)
to adjust the leg rest, press both (left & right) buttons to bring the leg rest to the desired
position.
9. INStALL tHE FRoNtBAR (fig. 9a, 9b)
Install the front bar by pushing it into the housings (9a). You will hear a click sound when they
are secured onto the frame. test the front bar by pulling on it to make sure it is locked into place.
Push the buttons at the  sides and pull out the front bar (9b) to release the front bar.
11. ADjUSt tHE HANDLE (fig. 10a, 10b)
Handle height can be adjusted by press the one hand button on top of the handle grip.
1. ASSEMBLE tHE CANoPY (fig.11 )
Insert the canopy plastic clamps into the housings on the  sides of the seat.
1. FoLDING AWAY (fig. 1a-1e):
Apply the brake on the stroller and lock the front swivel wheels first. Set the stroller back rest to
the upright position (1a). Press the nd lock button on the stroller handle, at the same time press
the handle button on the handle grip, and push the handle downward (1b) to unlock the stroller.
keep holding the handle grip, and then pull the folding catch up to (1c). keep pulling the folding
catch up until the stroller is completely folded (1d), and then fix the transportation lock (1e).
. SECURE tHE CHILD IN tHE SEAt (fig 13):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt (the
one that comes between the child's legs). Adjust the length of the belt to your child's needs. Always
ensure the straps are not twisted or caught on the stroller frame. Check the adjustment every time
you place the child in the seat and when the backrest is reclined. to release the harness, squeeze &
open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click into
position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has its own
length adjuster (D). to undo the harness, press the buttons and pull apart. "D" Rings are provided for
fitment of a full safety harness. the attachment points (D-rings) are located on side straps.
GB
11