WARNING: (A child's safety is your responsibility.) the child should be harnessed in at all times
GB
and should never be left unattended. the child should be clear of moving parts while making
adjustments. this stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use
as instructed. Never use the harness without the shoulder straps.
3. FAStENING tHE IN 1 SoFt CARRY Cot (optional accessory) (fig. a-c)
Do not place any additional mattress in the soft carry cot. the soft carry cot should be
securely fixed by the attached plastic hooks to the D-rings, which are on the stroller seat (fig
a). then further secure the carry cot by fasten the nylon strap from the carry cot to the
footrest of the stroller (fig. b-c).
oPtIoN FEAtURE 1 – SHoP N DRIVE tRAVEL SYStEM:
this stroller is able to adapt our Hauck Car® Infant Carseat as a travel System. to adapt the
carseat, please follow the following steps:
A. Release the stroller's backrest to the lowest recline position, and then open the side covers (left
& right) on the stroller (fig. A)
B. Place the Hauck's CAR® Infant Carseat onto the stroller, the car seat should face towards the
stroller's handle. Fix the car seat's side latch into the stroller's armrest slot (figure B). Lift up
carefully the carseat to check if the car seat is securely locked in place.
C. You can fold back the car seat handle by pressing the buttons on the sides of the car seat
(figure C).
D. to release the car seat, bring the car seat handle to the upright position. Hold the top part of the
car seat handle, push the top button to the left, and squeeze the bottom button up and the lock
will be release. (figure D1 & D). then lift up the carseat carefully, and close the side covers on
the stroller.
oPtIoN FEAtURE – PRAM:
this stroller is able to adaptor our Hauck CAR CoCooN Infant Carseat Pram.
1. Release the stroller's backrest to the lowest recline position, and then open the side covers (left
& right) on the stroller (fig. i)
. Place the Hauck's CAR CoCooN® Infant Carseat Pram onto the stroller, the pram should face
towards the stroller's handle. Fix the pram's side latch into the stroller's armrest slot (figure ii).
Lift up carefully the carseat to check if the car seat is securely locked in place.
3. You can fold back the pram handle by pressing the buttons on the sides of the car seat (figure
iii).
4. to release the pram, bring the pram handle to the upright position. Hold the top part of the pram
handle, push the top button to the left, and squeeze the bottom button up and the lock will be
release. (figure iv & v). then lift up the pram carefully, and close the side covers on the stroller.
5. Always ensure the pram is securely installed before placing the baby inside. the pram is
recommended for baby from newborn to 9 months old.
UPkEEP AND MAINtENANCE
In General
Please check the stroller functions on a regular basis. Make sure that the frame is stable, the screws
are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are
in working order. Check the cover occasionally, making sure that the stitching is still firm, and inspect
the quality of the plastic parts. Any broken or worn working parts should be replaced immediately.
Proceed in the same manner with components that are broken, torn, defect or worn-out. Please use
only original hauck replacement parts.
Do not subject your stroller to excessive sunshine. this can lead to a fading of textile covers and
plastic parts.
Cleaning the covers
Remove the covers from the frame by loosening the loops, press studs or screws. Please read the
instructions on the sewn-in label before cleaning.
to clean the cover gently, wipe it down evenly using only a damp cloth. As long as there are no
plastic, wood or metal parts on or in the cover, it can be machine-washed at 86°F (30°C) and medium
speed. the cover should be air-dried, but not exposed to excessive sunshine. Please do not dry the
cover in the drier, to avoid shrinking. Do not re-fit the covers until they are completely dried.
Cleaning the frame
Dry the stroller with a soft cloth after cleaning or after use rain or snow. Use only mild soapy water or
lukewarm water to clean the frame of your stroller. Plastic parts can be cleaned with mild detergent
cleaners.
Wheel maintenance
Clean and service the wheels regularly. Apply corrosion or lubricant spray on the rim when necessary,
to protect against rust and deposits. Please make sure in winter that road salt residue is removed
immediately by using warm water and damp cloth. Remove dirt from the wheels and axles on a
regular basis.
1