Distance Measurement; Using The Mil Crosshairs - MINOX BN 7x50 C Manual

screw (6) from the tripod thread on the under-
side of the MINOX BN 7x50C. Connect the
MINOX tripod mount to the thread turning it
in clockwise direction.
Keep the cap screw (6) in a safe place and
screw it back into the tripod thread after re-
moving the tripod mount.

Distance measurement

Using the MIL crosshairs for distance
measurement (telemetry system)
With the MINOX BN 7x50 C you can use the
analog reticle plate (crosshairs) to determine
the distance of observed objects. Distance
measurement can be carried out with the aid
a simple equation, as long as the height or
length of the observed object are known with
sufficient accuracy: in practice the size (height/
length) is usually known because the observed
objects are mostly people, buildings or ve-
hicles.
35