Removal; Removal When Secured With The Vehicle's 3-Point Seat Belt - Mercedes-Benz BABY-SAFE plus II Instrucciones De Servicio

Removal

16
12
11
10
4. Guide lap belt b over the child seat and
X
engage the belt tongue in belt buckle a.
5. Insert lap belt b in the blue seat belt
X
guides c on both sides of the child seat.
Caution Do not twist the belt.
6. Pull lap belt b tight.
X
Caution Make sure that belt buckle a is not
located in blue seat belt guide c or extends
so far forwards that it is in front (in the
direction of travel) of blue belt guide c.
7. Check that the child seat is installed
X
correctly.
8. If necessary, remove the child seat from
X
the vehicle and repeat steps 2 to 7 until
the child seat is secured correctly.
15
9. Fold out D-SIP
X
vehicle door.
Note: The extended D-SIP
additional accident protection in the event
of a side impact. Never use it to carry or
secure the child seat.
®
f on the side of the
®
serves as
Checklist for correct installation
For the safety of your child, check before
each journey that:
the child seat is installed against the
^
direction of travel.
the child seat is only attached to the front
^
passenger seat if no front passenger
airbag can act on the child seat.
the child seat is secured in the vehicle with
^
a 2-point seat belt as described above.
lap belt b is routed through the two blue
^
belt guides c of the child seat.
belt buckle a is not located in blue seat
^
belt guide c or extends so far forwards
that it is in front (in the direction of travel)
of blue belt guide c.
®
D-SIP f on the side of the vehicle door
^
is folded out.
the seat belt is tightened and not twisted.
^
Removal
Caution When not in use, keep the child seat in
a clean and safe place. Do not place any heavy
objects on the child seat and do not store it
next to heat sources or in direct sunlight.
Removal when secured with the
vehicle's 3-point seat belt
15
20
1. Press orange button l and fold down
X
®
D-SIP
f.