Torque Regulation; Maintenance And Cleaning Instructions; Cleaning And Storage; Environment Safety - VITO PRO-POWER VIBCBSFL20 Manual De Instrucciones

EN
1. The drilling mode ( ) is appropriate
for plastic, PVC, metal and wood
drilling works, among others;
2. The impact drilling mode (
be used when drilling in concrete, stone
and masonry;
3. The screwing mode (
tightening/untightening operations;

4.5 - TORQUE REGULATION

(FIG. H)
The torque regulation shall be carried
according to the type of work and the
size of the screws in use.
1. To select the desired torque value,
rotate the torque regulator (3) in
accordance with the scale (1-16).
For less dense surfaces and smaller
screws use lower torque positions. For
denser surfaces and bigger screws use
higher torque positions.
5. MAINTENANCE
AND CLEANING
INSTRUCTIONS
Before inspection, maintenance and
cleaning works, turn the equipment off
and remove the battery.
This equipment doesn't need additional
lubrication or maintenance. However,
it needs a proper
and a regular cleaning to operate
continuously with no issues.

5.1 - CLEANING AND STORAGE

Cleaning
After each use clean
components. Clean the machine with a
clean and damp cloth and blow it with
low pressure compressed air. A careful
handling protects the machine and
extends its lifespan.
This machine and its ventilation
openings must be always clean. Clean
it regularly or every time they get
obstructed.
) shall
Storage
Every time the machine isn't being
) allows used, store it inside dry, clean and
corrosive steam free places away from
children's reach. Remove the battery
when storing the drill.
6. ENVIRONMENT
The packaging is made up of
recyclable materials, which
you can dispose on local recycling
points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19
electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
You can obtain information regarding
the disposal of the machine through
the person in charge for the recycling
in your city.
maintenance

7. CUSTOMER SERVICE

Phone: 00351 256 331 080
all the E-mail: sat@centrallobao.pt
Website: www.centrallobao.pt
SAFETY
/EC on electrical and
23