Taurus MO20IXM Manual Del Usuario página 7

The accessible surface may be hot during
operation.
Installation Instructions
Please Read the Manual Carefully Before
Installation
Accessories for installation:
1. Screw A
2. Screw B
4. Mounting plate
3. Trim-kit plastic cover
Electrical connection
The oven is fitted with a plug and must be only
connected to a properly installed earthed socket.
In accordance with the appropriate regulations,
the socket must only be installed and the
connecting cable must only be replaced by a
qualified electrician.
If the plug is no longer accessible following
installation and all-pole isolating switch must be
present on the installation side with a contact
gap of at least 3mm.
Built-in furniture
- The built-in cabinet shall not have a rear wall
behind the appliance. Minimum installation
height is 85cm.
- Do not cover ventilation slots and air intake
points.
1.
2.
NOTE: The bracket and bottom cabinet template
are needed when installing in both installations.
Prepare the cabinet
1. Read the instruction on the bottom cabinet
template, put the template on the bottom plane
of cabinet.
2. Make the marks on the bottom plane of
cabinet according to marks "a" of the template.
Mark the centre line.