Technical Data; Safety Devices; Safety And Information Signs - Angelo Po 291FAGF Manual De Uso E Instalación

See tables and "Connection chart" at the back of
the manual.
Although the appliance is complete with all safety
devices, during installation and connection additio-
nal devices must be added if necessary to comply
with the relevant legal requirements.
The illustration shows the position of the devices.
A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Safety thermocouple: cuts out the gas supply if
the flame goes out
C)Safety thermostat: cuts off the gas supply to the
burner in case of valve malfunction.
Caution - warning
Make a daily check that the safety devi-
ces are properly installed and in good
working order.
The illustration shows the position of the signs pro-
IT
IT
vided.
A)Nameplate with manufacturer and appliance
GB GB
data.
B)General hazard: read the manual carefully be-
DE DE
fore carrying out any procedure.
C)General hazard: when washing the appliance do
FR FR
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
ES ES
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is com-
pliant with the relevant norms.
English

TECHNICAL DATA

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

B
G
A
H
H)WEEE symbol: indicates that the appliance is
subject to specific waste disposal regulations.
L) General hazard: Do not use the gas oven and
electric grill at the same time.
- 6 -
C
B
A
IDM-39617000300.tif
D F
E
C
IDM-39617000400.tif
L
B