Defrost Water Drain Installation - CIBIN Alaska Manual

1.2.4. DEFROST WATER DRAIN INSTALLATION

A) FASTEN the supports for the bails on the cold room wall with self-tapping screws (fig 1.2.4.a).
WARNING!! The client is free to choose the quantity and position of the supports (see the recommended measures in the hole
diagram).
B) INSERT the supplied coiled sheath through the passage hole in the lower part and the drain pipe for at least 70 mm.
GB
C) FASTEN the coiled sheath to the supports with bails (Fig.1.2.4.b).
Fig.1.2.4.a
Fig.1.2.4.b
D) CUT the drain protection sheet metal to the required
length.
E) FASTEN the drain protection sheet metal with screws to
the cold room wall (Fig.1.2.4.c).
Fig.1.2.4.c
73