Detailed View; Led Indication - SilverStone DS222 Manual

Drive Storage DS222
Instruction

1.5 Detailed View

Front View
DC 5V
＊If your laptop is unable to support DS222 with full power, please connect the micro-USB 5V/1A mobile phone
charging cable to provide sufficient power for the DS222.
You need to first turn DS222's power switch off, wait for 3-5 seconds, then turn it back on to connect the
USB 3.0 Y cable and 5V/1A mobile phone charging cable to the DS222.

1.5.1 LED indication

Status
LED
Power Red = Power on
HDD1 Blue = hard drive detected , Flashing = Data access (read/write), Off = HDD failed or empty drive bay
HDD2 Blue = hard drive detected , Flashing = Data access (read/write), Off = HDD failed or empty drive bay
Non-RAID Yellow = Non-Raid activated.
RAID 0 Yellow = Raid 0 activated.
RAID 1 Yellow = Raid 1 activated.
BIG NR, R0 and R1 = Yellow = total volume of existing one or two hard drives
Note
1. In order to determine if the correct mode is selected, please ensure the RAID switch is in the correct position.
2. If drive failed in any mode, the alarm (buzzer) will sound to warn users.
3
LED
Buzzer switch
Rear View
Confirm button
for RAID mode change
RAID mode change
EN
RAID
indication