Safety Instructions - Oglo MS-O-300-D Manual De Instrucciones

INSERTING BATTERIES INTO THE REMOTE CONTROL
The remote control works with two AAA LR03 1.5 V batteries.
•
We recommend using only alkaline batteries.
•
Remove the batteries from the remote control if you are not going to use it for a long time (more than
•
a month).
Used batteries must be disposed of safely. Place them in specially designated collection bins to
•
protect the environment.
USING THE REMOTE CONTROL
Aim the remote control at the infrared sensor on the front of the micro hi-fi system at a 60° angle so
•
that the micro hi-fi system receives the transmitted information.
The remote control has a range of 8 meters.
•
Make sure that there are no obstacles between the remote control and the infrared sensor and that
•
no sunlight or other light source is refl ected on them.
30 30
Open the cover on the back of the remote control.
1.
Place the batteries in the remote control, respecting the +
2.
and - polarities indicated.
Put the cover back on.
3.
instructions for use
BEFORE USING THIS DEVICE FOR THE FIRST TIME, PLEASE CAREFULLY READ THESE
INSTRUCTIONS AND SAVE THEM FOR FUTURE REFERENCE.

Safety instructions

WARNING: TO MINIMISE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT OPEN UP THIS
DEVICE
No part of this device must be repaired or
replaced by the user. Repairs and maintenance
should only ever be carried out by qualifi ed
personnel. Dismantling the device in any way will
void the warranty.
The lightning in a triangle symbol is
used to warn the user of uninsulated
high voltage in the device's system
that could be strong enough to
constitute a risk of electric shock.
The exclamation mark in a triangle
symbol is used to draw the user's
attention to key operational
maintenance (routine maintenance) safety
instructions in the instructions accompanying the
device.
Check that the voltage indicated on the device's
•
rating plate corresponds to the voltage of your
electrical system.
Do not use this device:
•
1. If the power cord is damaged,
2. In case of malfunction,
3. If the device has been damaged in any way.
Connect the power cable to an easily accessible
•
mains socket.
Make sure that the power cord cannot be
•
crushed or pinched, especially around the plug,
power point, and the connection point to the
device.
The device is only designed to be used indoors.
•
Make sure that the device is placed on a fl at,
•
stable surface (particularly avoiding placing it on
fabric or carpet).
Do not place this device near to any heat
•
sources, such as radiators, hot air vents or
ovens, or similar appliances (especially amps)
that produce heat.
Do not expose the device to direct sunlight or
•
dust.
Do not use this device near water or sources of
•
damp/humidity, such as baths, washbasins, sinks or
swimming pools, or in damp basements or any other
damp location.
Do not place naked fl ames (for example, lit
•
candles) on top of or near the device.
Do not spill or splash liquid on the device, and
•
do not place any objects containing liquid (e.g.
a vase) on top of the device.
or
You should leave a space of at least 10 cm around
•
the device to ensure adequate ventilation.
Do not place this device in a tight space such as a
•
bookcase, behind curtains, etc.
in order to ensure suffi cient ventilation.
31