Storing A Dab Radio Station - Oglo MS-O-300-D Manual De Instrucciones

manual search
Select the menu with the
2.
automatic search starts.
Press the or button to switch between the frequency ranges 5A to 13 F.
3.
Press to open the selected range. When searching manually, no station is broadcast. The stations
4.
found on the frequency range are automatically added to the list of stations already stored. To access
them, stop the manual search and then browse the list of stored stations.
You can also hold down the
5.

Storing a DAB radio station

When the micro hi-fi system is turned on, select the DAB+ station of your choice.
1.
Press and hold the PROG button. Memory number 01 fl ashes on the display. Use the
2.
button to select the desired memory number. Press
DAB+ station. MEMORISED appears on the display.
Repeat as often as necessary.
3.
The programmed stations remain stored even after switching off the device.
•
Programming a new station under an already assigned number automatically erases the previously
•
saved station.
You can program up to 30 radio stations.
•
Listening to a stored DAB radio station
Briefl y press the PROG button, and then use the
•
memory number (1 to 30) and listen to the stored radio station.
Displaying DAB information
In DAB+ mode, the micro hi-fi system displays information about the station being played. In addition
•
to the current time, this includes the name of the selected radio station as well as other information
transmitted by the secondary DLS (Dynamic Label Segment) of the transmitter. This may, for example,
be the title and name of the artist or contact information or additional information provided by the
transmitter.
When the information is longer than 16 characters, it is displayed as scrolling text.
•
By pressing the INFO button several times, you can scroll through the Info menu and view all the
•
information available (program type (PTY), station name, channel and frequency, signal error rate,
bit rate and audio type, DLS text information, DL Plus info (if available), time, date, signal strength).
40 40
or button, and then press
or button for 2 seconds to perform an automatic scan.
to confi rm the programming of the
or button to select the desired
. The
Accessing the confi guration menus
Press the MENU button, and then select the
remote control. Press the
Use the or
confi rm.
reset y
: Select
»
The list of available stations will also be erased and the preset memories will be erased. After the
factory reset, the micro hi-fi system will start a new automatic scan and update the station list.
or
update : Select y
»
software version
»
micro hi-fi system.
language : Select the language of your choice from the different options using the
»
button.
system menu with the
button to confi rm.
button to scroll through the various options, then press the
to reset all of your micro hi-fi system's settings to the original factory settings.
to update the software installed on your micro hi-fi system.
: This option displays the version number of the software installed on your
or button on the
button to
or
41