User'S Instruction; Getting Start - FUNK WS9252 Manual De Instrucciones

WS9252 - RADIO CONTROLLED WIRELESS WEATHER STATION
Please read the instructions carefully and keep the manual well for future
reference.

GETTING START

Before using the main unit and transmitter:

Remove the battery door of the main unit and transmitter.

Install 2 new AA size batteries for both main unit and transmitter,
according to the polarity mark on the battery compartment.

Replace the battery door.

After the batteries are installed, all LCD segment will be shown.

Press the "RESET" key of main unit first, and press the "RESET" key
of transmitter.

It will automatically receive 433 MHz signal from transmitter for
channel test in 8 seconds.

After 5 minutes channel test, it will turn to RC signal reception
automatically.

Radio controlled function, the current time & date automatically
synchronized with the time signal transmitted from Germany(DCF77).
Note:

The unit can operate up to 3 remote transmitters.

Position the unit and transmitter within the effective transmission range:
50 meters in usual circumstances.

In some cases, you may not receive the signal immediately, you can
reset the unit and transmitter again as described above.
MAIN FEATURES
MAIN UNIT:

USER'S INSTRUCTION

GB1