Signal Strength Indicator - FUNK WS9252 Manual De Instrucciones


During the RC reception, press and hold it for 3 seconds to turn off
synchronisation.
10. RESET key

In case of mal-function, press it by using a metal wire to reset all the
values.
11. Battery door
TRANSMITTER:
1. LED indicator

Flashes when the remote unit transmitting a reading.

Display of the channel, temperature and humidity.
2.LCD display
3. CHANNEL slide switch

Assign the transmitter to Channel 1, 2 or 3.
4. RESET key

Press it to reset the transmitter.
5. Wall-mounting holder

Use it to support the transmitter on the wall.
6. Battery compartment

SIGNAL STRENGTH INDICATOR

The signal indicator flashing means time signals are being received. If the
RC weather station receives signal successfully, a sync-time symbol "
appears on the LCD. The unit has already received the time signal.
Otherwise, the signal strength symbol will disappear from the LCD display.
Note:
GB3
"