AnMo Electronics Dino-Lite Manual De Usuario página 11

DinoCapture 2.0 User manual
Measurement options
Measure ment
properties
Magnifier
Magnifi cation
Units
Calibration
menu
Barcode Reader Click on the icon to enable and disable barcode
Preview window tools
10 English
Organize and show the status of all the
measurements as well as the ability to adjust
how the results are shown on the image.
Digitally enlarge the area around your
mouse pointer for more details and accurate
measurements.
Input the magnification in the blue box. The
magnification can be read from the dial on the
microscope.
Select the unit of measurement, inch, mil, mm
or um.
Select calibration, create new calibration profile
or open the calibration folder.
detection
Microtouch - this is activated when you touch
the Microtouch sensor. Activate or deactive the
Microtouch. Some Dino-Lite models do not have this
feature.
Auto Exposure - This allows you to change the
exposure or turn off auto exposure. Sliding the bar to
the right increases the exposure time and vice versa.
LED control - lets you turn ON/OFF or switch LED's on
the Dino-Lite (most models).