Recharging the NIMH battery pack PB-ATL/G7 800 mAh
Place your transceiver into the cradle of the desktop charger or connect the
MW904 wall adaptor to the proper jack of the radio.
This type of batteries is recharged with a constant current, either you use a
desktop charger or MW904, therefore a complete recharge takes about 5
hours.
There's no evidence when the recharge is finished, therefore we suggest you
detach the wall adaptor from the radio or remove G7 Pro from the desktop
charger cradle after 5 hours.
When the radio is in the charger cradle, the processor makes a sort of checking
on the battery; the led on the charger will light up for 10 seconds, then will turn
off and the recharge will start; the battery icon on the radio's display will be
blinking for all the recharging process, as well as the red led will be lighting up on
the desktop charger.
Recharging the Li-Ion battery pack 'PB-PRO'
(optional)
Place your transceiver into the cradle of the desktop charger or connect the
MW904 wall adaptor to the proper jack of the radio.
The recharge of the Li-Ion battery pack is managed by a radio processor and
the battery status can be checked by the icon on the display and by the led on
the desktop charger
• The recharge status is indicated by the led on the desktop charger and by
the battery icon blinking on the display of the radio;
• When the recharge is complete, the led will turn off and the battery icon on
the display will be full of bars and fix.
When the radio is in the charger cradle, the processor makes a sort of checking
on the battery status: in this step, the led on the desktop charger will light up for
10 seconds, then will turn off and the recharge will start.
To optimize the recharge of the Li-Ion battery pack, in the final phase the pro-
cessor will alternately charge and pause for almost one minute (the led will turn
off).
If the radio is placed in the desktop charger switched on, when the recharge is
complete the led will blink.
Midland G7 Pro user's manual
| 11