Assembly Extempore Table Extra High - Extremis EXTEMPORE Manual De Instrucciones

MONTAGE EXTEMPORE TAFEL EXTRA HOOG
WHAT YOU NEED
2 people
no. 13 spanner
no. 4 hex key
+/- 15 min.
2. Take the aluminium tube and put an inox rod in the
hole on each side. Fix the rods with a screw M6x30.
4. Place the legs together on the inox rods of the tables
as shown on the picture. Repeat the last 2 actions for
the other side of the table.
1. Put the tabletop on the ground upside down (the
wooden surface should face the ground). Use the
packing material to protect the surface. Insert the 4
assembly rods in the holes provided to that end in the
corner elements. Tighten the rods by means of the 4
bolts using a no. 13 key. Do not tighten the bolts too
much as this could cause them to break.
3. Take 1 left and 1 right leg and put the inox rod in the
holes.
5. Fix the 4 legs by tightning the screws. The table is then
ready. Turn it upside down.
english 5