Homak HS50121160 Guía De Utilización Y Directivas De Funcionamiento página 3

damaged. Damage to the fi re-resistant panel will
decrease the safes resistance to high temperatures.
Step 2
Once the fi re-resistant panel is removed from the
safe door, the locking mechanism will become ac-
cessable to a locksmith.
RE-INSTALLING THE FIRE RESISTANT PANEL:
The fi re-resistant panel can be re-insterted by plac-
ing it back into the safe door framing. Make sure
that all sides of the panel are secured by the door
frame, sliding the bottom into place (refer to step 1).
Locate holes at bottom of safe door.
SHELF INSTALLATION:
When installing the shelves, fi rst locate the small
plastic bag containing the (16) shelf support clips.
Push each clip into place, fl at side up fi rst then
pinch bottom side into the guide strips on the side
walls inside the safe. Make sure to count down
the number of holes in the guide strip so that each
shelf is level and properly supported.
Step 1 Step 2
EACH INDIVIDUAL SAFE IS ASSIGNED A COMBINATION CODE
WHICH IS PRINTED ON THE BACK OF THIS MANUAL
HOW TO UNLOCK SAFE:
- 3 -