Homak HS50121160 Guía De Utilización Y Directivas De Funcionamiento página 4

HOW TO UNLOCK SAFE (Cont.):
1. Turn dial clockwise three times around and then stop at the fi rst combination number
given in your combination code.
2. Turn dial counterclockwise twice around and then stop at the second combination
number given in your combination code.
3. Turn dial clockwise once around then stop at the third combination number given in
your combination code.
4. Turn handle/spoke clockwise and pull door open.
HOW TO LOCK SAFE:
1. Close the door.
2. Turn the handle /spoke counterclockwise to the locked position.
3. Turn the dial either direction to clear the combination and secure the safe properly.
CAUTION:
This safe is not recommended for storing CDs, memory cards,
photography/digital imaging equipment, and/or other electronic devices.
*NOT INCLUDED IN ALL SAFE MODELS*
PLASTIC BARREL REST INSTALLATION (OPTIONAL):
The safe also comes with an optional plastic barrel rest and mounting bar.
The barrel rest mounting bar comes with a velcro backing so it can be easily mouned
against the side wall to custom fi t gun barrels of different lengths. After the barrel rest
mounting bar has been attached, the barrel rests can then slide into place. Barrel rests can
be moved or adjusted at any time to better fi t your safe.
Barrel rests slide into place as shown in
illustration below.
Plastic Barrel rest mounting bars can be clipped
together to extend mount.
Behind the barrel rest mounting bar and under
the velcro backing there are snap lines in the
plastic. This is an optional feature that allows
the owner of the safe to provide a custom
configuration for mounting several guns of
different lengths. Cut the velcro strip in the
section of mounting bar marked with
notches, as shown below. Once Velcro is cut the
mounting bar can be snapped easily as shown
in photo below.
- 4 -