K2 Pumps PPV10001SPK Manual Del Propietário página 11

2. Set pump parameters
3．Set time
Long press for more than 3 seconds to enter the setting mode and enter the setting time state. The 12 of
start flashing, you can go through
enter the mode of setting minutes. At this time, the
the time is adjusted, the setting will be automatically saved in 10 seconds, and the setting time mode will exit to enter
the working mode.
4. Set working time and speed
In the setting mode, after setting the current time, it will automatically enter the setting time period 1 mode. At this time,
you can set the start time and stop time of the pump as well as the running speed. When
flashing, the time can be adjusted through
time and stop time,
For Professional Technical Support call 1-844-242-2475
Long press the set key for 3 seconds
Set the time and speed of time period 1
Set the time and speed of time period 2
Set the time and speed of time period 3
Set the time and speed of time period 4
To exit the setting mode, do not press the button
for 10 seconds
and
start flashing, at this time for the first time running speed, we can set the speed by
Set time mode
and to adjust the hours. Press
flash starts, it can also be adjusted by
, press to confirm, and so on，after when set the start
to confirm, and
and .When
in starts
11