Bionik VULKAN Guia Del Usuario página 10

will automatically re-pair to your device.
WIRELESS PC CONNECTION WITH DONGLE
1. Move the mode selection switch to the PC icon (FIG. 3).
2. Gently remove the battery cover on the back of the Vulkan™ and
remove the wireless dongle (FIG. 1). Replace the battery cover.
Insert the wireless dongle into an available USB-A port on your PC.
3. Press the home button once. The home LED will flash orange. The
wireless dongle will automatically pair with the Vulkan™. Once
paired, the home LED will be a solid orange.
WIRED PC CONNECTION WITH CABLE
1. Move the mode selection switch to the PC icon (FIG. 3).
2. Uncoil the included Micro-USB cable. Gently straighten the cable
as you unwind it.
3. Gently insert the Micro-USB end of the cable into the Micro-USB
port at the top of the Vulkan™ (FIG. 4). Gently insert the USB-A end
of the cable into an open USB port on your PC.
4. The Vulkan™ will automatically wake up paired; the home LED will
be a solid white.
NOTE: The Vulkan™ does not require batteries while connected
via cable.
BUTTON MAPPING THE REAR PADDLES
1. Turn the button mapping feature on by moving the center switch
on the customization panel down (FIG. 5).
2. For each paddle, move the mapping slider to the button that you
would like to map the paddle to (FIG. 5).
3. To turn the button mapping feature o , move the center switch on
the customization panel up (FIG. 5).
.SWAPPING THE JOYSTICK CAPS
1. Gently unscrew the cap of the joystick counterclockwise (FIG. 6A).
2. Gently screw in the selected replacement cap clockwise until it is
secure (FIG. 6B). WARNING: Do not overtighten joystick caps.
SLEEP MODE
1. To conserve battery, wireless pairing mode for both Android
PC will shut o after 2 minutes of inactivity; once paired, the
Vulkan™ will shut o after 10 minutes of inactivity.
9
and
™