The machine will start the rinsing cycle.
During milk system cleaning, the display will show
the following animation.
At the end of supply, rinsing is completed.
Remove and empty the container used for rinsing.
For a new supply cycle, wait for supply buttons
and multifunction button
steady white light
MAINTENANCE AND CLEANING
turning on with
DESCALING
Limescale normally builds up with extended use
of the appliance; the machine needs descaling
every 3-4 months and/or whenever a reduction
in water flow is noticed.
The descaling cycle will be requested by the
machine when the following signal is shown on
the display.
To run the descaling cycle refer to chapter
MENU".
"MACHINE
In the event of any operational conflict, this use
and maintenance manual shall prevail on any indi-
cation specified on accessories and/or compo-
nents sold separately.
EMPTY THE USED CAPSULES TRAY
The display will show the following animation to
indicate that the used capsule drawer is full.
Empty and reinsert it.
If the drawer is removed for more than 5 seconds,
the machine will zero the capsules inserted count.
EN
23