Kohler K-7337 Guia De Instalacion página 3

Threaded
Shank
Escutcheon
O-Ring
1. Install the Faucet
IMPORTANT! If you are mounting the faucet to an uneven surface
(such as tile grout lines), apply a suitable sealant in addition to the
O-rings provided. Do not use petroleum based sealant.
Insert the O-ring into groove of each escutcheon.
Slide an escutcheon over each of the threaded shanks.
Position the faucet through the mounting surface.
NOTE: The handles will rotate toward the user when properly
installed.
Partially thread two screws into the threaded ring until the
screws barely protrude from the backside of the threaded ring.
Slide a metal washer onto each threaded shank from underneath
the mounting surface.
Thread the threaded ring onto the shank until the threaded ring
is about 1/4" (6 mm) away from the underside of the mounting
surface.
Turn the threaded ring so the screws are to the front and back.
Kohler Co.
Mounting
Surface
Metal
Washer
Threaded
Ring
Screw
3 1069104-2-B