Setting The Alarm Time - Silvercrest SFPW 360 B1 Manual De Instrucciones

Setting the alarm time

The device allows you to set two different alarms . The
set alarm times always relate to the time shown on the
display (local time or time zone) .
In basic mode, press the SET button 8 once to
♦
access alarm mode . The current alarm time is
shown on the display and the symbol for the first
alarm (AL1) .
Press the SET button 8 for about 3 seconds . The
♦
hours flash on the alarm time display .
♦ Press the – /WEEK LANG button 5 or the
+ /12/24 button 6 to set the desired value .
Press the SET button 8 to confirm your entry .
♦
The minutes flash on the alarm time display .
♦ Press the – /WEEK LANG button 5 or the
+ /12/24 button 6 to set the desired value .
♦ Press the SET button 8 to confirm your entry . The
alarm time 1 is set now .
The process for setting the second alarm time is
similar to that of setting the first.
♦ In basic mode, press the SET button 8 twice to ac-
cess alarm mode . The current alarm time is shown
on the display and the symbol for the second alarm
(AL2) .
♦ Now, follow the steps described above to set the
second alarm time .
■ 18
_330014_SFPW360B1_LB9.indb 18
│
US - EN
SFPW 360 B1
03.09.19 12:2