Activating/Deactivating The Alarm; Switching Off The Alarm Signal; Snooze Function - Silvercrest SFPW 360 B1 Manual De Instrucciones

Activating/deactivating the alarm

After setting the respective alarm times, these must still
be activated .
♦ Push the On/Off switch
position . The respective alarm symbol ( )
appears on the display and indicates that alarm
1 or 2 is activated .
♦ Push the On/Off switch
position . The respective alarm symbol ( ) goes
out on the display and alarm 1 or 2 is deactivated .

Switching off the alarm signal

The alarm signal will sound at the set time for around
4 minutes and the corresponding alarm symbol (
or
♦
Press any button other than the
turn off the alarm signal .
You do not have to reactivate the alarm function . The
alarm signal will automatically sound again at the set
time on the next day .

Snooze function

♦ While the alarm is going off, press the
The alarm signal is interrupted for around 5 minutes .
The snooze symbol (
(
SFPW 360 B1
_330014_SFPW360B1_LB9.indb 19
) flashes on the display .
button 1 to activate the snooze function .
or ) flash on the display .
9 or
9 or
) and respective alarm symbol
US - EN
q to the "ON"
q to the "OFF"
button 1 to
│
19 ■
03.09.19 12:2