System Requirements - SMC Networks Unidad Flash USB e inalámbrica EZ Connect Guia De Inicio Rapido

System Requirements

Before you install the EZ Connect™ Wireless USB Flash Drive,
check whether your system meets the following requirements:
• An available USB port.
• Windows 98SE/Me/2000/XP (have the Windows installation
CD-ROM ready for use during driver installation).
• A minimum of 10MB of free disk space for installing the
driver and utility program.
• Another IEEE 802.11b or 802.11g compliant device installed
in your network, such as the SMC7004VWBR Barricade™ Wireless
Broadband Router, or another PC with a wireless adapter.
3
Hardware
The EZ Connect™ Wireless USB Flash Drive supports 1, 2, 5.5 and
11 Mbps half-duplex connections to Ethernet networks. This device
is fully compliant with 2.4GHz DSSS CSMA/CA wireless networking
as defined in IEEE 802.11b. It has integrated storage capacity of
up to 32MB. The EZ Connect™ Wireless USB Flash Drive is the only
device in the world that can operate as a Wireless USB Adapter
and a USB Flash Drive simultaneously! The USB Flash Drive supports
complete and instantaneous Plug-and-Play interoperability on the
latest Windows operating systems. Windows 2000 and XP users do
not need a CD-ROM in order to install this adapter! (See the
installation instructions.)
The EZ Connect™ Wireless USB Flash Drive has a blue LED to
indicate wireless operation. Please check the table below which
displays the current status of the specific LED:
LED Status Function
Wireless LAN Blinking Scanning the WLAN
(Blue)
On Device is connected to the WLAN
(Blue)
4