IWC Schaffhausen 3782 Instrucciones De Manejo página 32

Adjusting the metal bracelet
If you have decided on a metal bracelet, you can easily
adjust it to the size of your wrist. You can make this
adjustment yourself by removing or adding individual
bracelet links.
Taking the bracelet apart
and removing individual links
securing pin (1) at the desired point of separation and,
at the same time, displace the pivot pin laterally by
about 3 mm (2) with the second special tool.
Open the push-button release
safety clasp by pressing the button
on the side. Lay the bracelet with
its top surface on a firm base.
Using the special tools provided,
you can now push down the
Now pull the protruding pivot
pin from the bracelet (3). The metal
bracelet is now separated, and
you can adjust the length of the
bracelet by removing or adding
individual links.