Installation; Preparing For Installation - Glacier bay HD67673-0001 Guía De Uso Y Mantenimiento

Installation

1

Preparing for installation

CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 4.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Unscrew the nut (K).
A
K
2
Installing the faucet assembly
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 4.
□
Before installation, ensure that the gasket (L)
is placed on the bottom of the new faucet (A).
□
Place the faucet (A) through the mounting
holes in the sink.
4
A
L