ZALMAN ZM-SHE350 Manual De Usuario página 10

ZM-SHE350 supports smart MOUNT and UN-MOUNT feature to make simple,
convenient and safe hardware removal. Press "MENU" button over 2 seconds,
then HDD is automatically disconnected. It works like [Safely Remove Hardware]. *
To run this function, there should be no data transfer between PC and ZM-SHE350
at that time.
Again, press "MENU" button over 2 seconds, then HDD is automatically
connected. Users have to enter the correct password again to run it.
■HDD Initialization
HDD in ZM-SHE350 should be initialized, partitioned and formatted first for
common usage (Reading and writing) via your OS. Below instructions are for
Windows 7. (Windows XP and Vista are also similar – Refer to below instruction!)
①Select [Control Panel] -> [Administrative Tools], then open up [Computer
Management], then go to [Disk Management]
②Your PC can't recognize the HDD installed in ZM-SHE350 because it's initialized
only by Software.
③Right-click on the external hard drive and select [Initialize Disk] to begin the
partitioning and formatting process.
Caution:
Please be careful not to initialize the used or existing HDD which includes
any valuable DATA on it.
10
WWW.ZALMAN.COM