Version Screen; Exiting The Installer Mode; Initial Settings - VENTILAIRSEC VMI PRESTIGE Manual De Instalación

4.7

Version screen

This screen shows the VMI® unit's and the remote control's software and
hardware versions. This information may be requested for technical monitoring
or assistance.
Use the
4.8

Exiting the installer mode

Press the
selection.
If "yes" is selected, the main screen appears.
If "no" is selected, the "language/date" screen appears.
4.9

Initial settings

Parameters:
In the installer mode, you can set the 2 parameters shown in the following table.
Parameter
Speed at which the VMI® unit
Rated speed
operates in automatic mode in
(RS)
normal conditions.
Filter usage duration before filter
Max filter
change warning is displayed
button to move on to exit the installer mode.
buttons to select "yes" or "no", and
Description
Factory
setting
To be adjusted for the volume to
ventilate to ensure a renewal
V9
rate of 0.5 volume/hour.
➔ See table below
The setting depends on the
200 days premises'
environment.
to confirm the
In situ setting
surrounding
59