Unpacking The Projector - Epson EMP-7850 Manual De Instrucciones

Unpacking the Projector

When you unpack the projector, make sure that you have all these components.
If any of the components are missing or incorrect, please contact the place of
purchase.
Projector
(With lens cover)
The illustration shows
a projector fitted with
a standard lens. The
configuration will
vary depending on
which lens is fitted.
Power cable
(3 m (9.8 ft.))
(3 m (9.8 ft.) yellow)
Connect to the
projector and to a
Use when projecting
wall outlet.
composite video
images.
Audio cable
(3.5 mm dia./1.8 m (6 (1.8 m (6 ft.))
ft.) stereo mini plug)
Use when connecting
Use when playing the projector to a
sound from a computer in order to
computer through the use the wireless
projector's built-in mouse function and to
speaker. transmit data.
Documentation
Read This First (this booklet)
Safety Instructions/
World-Wide Warranty Terms
Remote control AA alkali
batteries
(2 pcs.)
Insert into the remote
control.
RCA video RCA audio cable
cable
(3 m (9.8 ft.) red/white)
Use when playing
sound from video
equipment through the
projector's built-in
speaker.
USB cable EasyMP Software
(CD-ROM)
Place this in the
computer when
installing the EasyMP
Software.
Wireless LAN
card
Place this card in the
projector's card slot to
connect the projector to
a computer via a
wireless LAN.
Computer cable
(mini D-Sub 15-pin/
mini D-Sub 15-pin, 1.8
m (6 ft.))
Use when projecting
images from a
computer.
Password Protect
sticker
When Password Protect
is enabled, attach these
stickers to your
preferred place on the
projector to increase
anti-theft effectiveness.
Document CD-ROM
Quick Reference Guide
EasyMP Setup Guide
3