Change Of Extruder; Recommendations For Use - Fimar MPF/1,5 Uso Y Mantenimiento

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PASTA FRESCA appliance
G) Selector: used to activate the forced air ventilation in the extruding area.
H) Switch: used to activate and deactivate electric cutter.
L)Regulator: used to adjust the cutting speed of electric cutter.
M) Indicator light: when on, the appliance is electrically powered.

CHANGE OF EXTRUDER

1 - Loosen ring nut (N).
2 - Replace extruder (P) with a piece sui-
table for the kind of processing to be
carried out
3 - Screw ring (N).

RECOMMENDATIONS FOR USE

1 - Assemble the utensils suited to the process to be performed.
2 - Insert a container with a suitable capacity under the extruder.
3 - Lift the container guard.
Food products to be kneaded must be in 2/3 solid to 1/3 liquid proportions.
4 - Add 1/3 solid food products then 1/3 liquid ones.
5 - Close the container guard.
6 - Operate selector (C) or pushbutton (E) to activate the kneading cycle of food pro-
ducts.
7 - Slowly add the remaining solid products in the first kneading phases.
8 - At the end of the kneading time, operate selector (C) or pushbutton (F) to activate the
extruding cycle of food products.
9 - Press the button (B) to stop the appliance when finished.
If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
Translation of the original instructions
N
- 11 -
P
GB
English language