Replacement Parts - Porter Cable PCE360 Manual De Instrucciones

PROJECT TIPS
• Cut only with sharp blades; they cut
cleaner, faster and put less strain on
the motor while cutting.
• When cutting, always ensure that
the shoe is held firmly against the
workpiece and the workpiece is
secured from moving/deflecting. This
will improve operator control and
minimize vibration.
• For longer blade life, use bi-metal
blades. These utilize a carbon steel
back welded to high speed steel teeth
making the blade more flexible and
less prone to breaking.
MAINTENANCE
UNPLUG SAW AND REMOVE
ACCESSORY WHEN PERFORMING
ANY CLEANING OR OTHER
MAINTENANCE. WHEN SERVICING
USE ONLY IDENTICAL REPLACEMENT
PARTS.
Use only mild soap and a damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of
the tool into a liquid.
• Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt, carbon dust etc.
• When electric tools are used on fiberglass
boats, sports cars, drywall etc., they are
subject to accelerated wear and possible
premature failure, as the fiberglass chips
and grindings and drywall dust are
highly abrasive to bearings, brushes,
commutator, etc. During any use on
fiberglass or drywall it is extremely
important that the tool be cleaned
frequently by blowing with an air jet.
LUBRICATION
Porter Cable tools are properly lubricated
at the factory and are ready for use. Tools
should be lubricated regularly every year
depending on usage. (Tools used on
heavy duty jobs and tools exposed to heat
may require more frequent lubrication.)
This lubrication should be attempted only
by trained power tool repair person such
as those at Porter Cable service centers or
in other qualified service personnel.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts
list or to order parts, visit our service website at
www.portercable.com. You can also order parts
from your nearest Porter-Cable Factory Service
Center or Porter-Cable Authorized Warranty
Service Center. Or, you can call our Customer
Care Center at (888) 848-5175.
SERVICE AND REPAIRS
All quality tools will eventually require servicing
and/or replacement of parts. For information
about Porter-Cable, its factory service centers
or authorized warranty service centers, visit our
website at www.portercable.com or call our
Customer Care Center at (888) 848-5175. All
repairs made by our service centers are fully
guaranteed against defective material and
workmanship. We cannot guarantee repairs
made or attempted by others.
You can also write to us for information at
PORTER-CABLE, 4825 Highway 45 North,
Jackson, Tennessee 38305 - Attention: Product
Service. Be sure to include all of the information
shown on the nameplate of your tool (model
number, type, serial number, etc.).
ACCESSORIES
This saw will accept up to a 12 inch long
blade. Always use the shortest blade
suitable for your project but long enough
to keep the blade cutting through the
material. Longer blades are more likely to
be bent or damaged during use. During
operation some longer blades may vibrate
or shake if the saw is not kept in contact
with the workpiece.
WARNING:
than those offered by Porter-Cable, have
not been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only Porter-Cable recommended
accessories should be used with this
product.
A complete line of accessories is available
from your Porter-Cable Factory Service
Center or a Porter-Cable Authorized
Warranty Service Center. Please visit
our Web Site www.portercable.com for a
catalog or for the name of your nearest
supplier.
This Class B digital apparatus complies
with Canadian ICES-003.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
NOTE: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
8
Since accessories, other