Setting The Device In Standby Mode; Choosing Heating Or Cooling Cycle; Being Away For 12 To 48 Hours: Eco Mode - Atlantic Panama A Serie Instrucciones De Instalacion Y De Uso

To set the unit in standby mode, press and hold the
button for at least 3 seconds.
Icon Designation
CONF Comfort
ECO Eco
QUIET Silence
CONF
This mode allows you to have the desired temperature in the room. The fan adjusts its speed to the needs.
In case of severe cold, the heat pump may not be able to maintain the desired Comfort temperature. In this
case, the heating front will provide the additional temperature to keep an appropriate room temperature.
If the screen is not illuminated, just press any key to turn it on.
To activate the Comfort mode,
press several times on
until the mode selection arrow is
on the COMFORT mode
During the heating cycle, the recommended comfort temperature is 19°C. It can vary between 13°C and 28°C.
To change the displayed
temperature, press on
or .
Wait at least 2 hours for the temperature to stabilize.
ECO
It is recommended to use this mode when you want to switch to economy mode and have a reduced
temperature. The temperature is not adjustable and is dependent on the Comfort temperature (-3°C, and limited
to a minimum of 10°C and a maximum of 19°C).

SETTING THE DEVICE IN STANDBY MODE

CHOOSING HEATING OR COOLING CYCLE

When to use this mode?
You are at home. You want a comfortable heating or cooling temperature.
You are away from home for 12 to 48 hours. You want to switch to economy
mode and have a lower temperature. The device will drop the temperature by
3°C in heating mode and increase the temperature by 3°C in cooling mode.
You are at home. You give priority to Silence mode.
HEATING YOUR ROOM:
HOW TO ACTIVATE THIS MODE?
.
HOW TO CHANGE THE DESIRED TEMPERATURE?
BEING AWAY FOR 12 TO 48 HOURS:
The panel and display turns off.
COMFORT MODE
DESCRIPTION
The mode light indicator will remain lit, allowing
you to view the current mode. The screen goes to
sleep.
Press again on one of the buttons to see the
temperature.
The selected temperature will be displayed on the
screen.
The
heating front starts heating.
ECO MODE
DESCRIPTION
12
light indicator will turn on when the