Led Indicators - Scosche RHYTHM RTHM1.9 Guia Del Usuario

USING THE ARMBAND MONITOR
Wear armband on the upper portion of the forearm.
Sensor should be on the inside or top of forearm. It
should be worn snug enough not to move on your arm,
but NOT so tight that it restricts arm circulation (Figure 3).
Initial Setup with Bluetooth Smart Fitness Apps
1. Set B/uetooth on the device to ON.
2. Find the Sensor Settings menu in the Bfuetooth Smart
Fitness App.
3. Connect the RHYTHM+ annband by turning it on.
Initial Setup with Bluetooth Smart devices
(Sports Watches & Fitness Equipment)
1. From the device settings menu select "Add HR sensor"
2. Connect the RHYTHM+ annband by turning it on.
Initial Setup with ANT+ devices (Sports Watches &
Fitness Equipment)
Turn on the armband and move within range of your
display device.
Note:
Heart Rate Monitoring will work with most Bfuetooth
Smart Fitness Apps. For a list of compatible Apps, please
visit www.scosche.com/rhythm-plus

LED Indicators

1. Alternating RED/BLUE - the armband is waiting for a
connection.
2. Three (3) BLUE blinks - the armband has connected
successfully.
3. Slow blink - the HR monitor is on and in nonnal operation.
LED Indicators (ANT+ Mode)
Slow blink - the HR monitor is on and in normal operation.
(Bluetooth Smart
4
FIGURE3
--------
-----=
Operation)