Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8
EN: Quick Installation Guide
Installation environment
When installing your product, consider these factors:
•
Electrical: Install electrical wiring carefully. It
should be done by qualified service personnel.
Always use a proper PoE switch, a 12 VDC UL
listed Class 2, or CE certified power supply to
power the camera. Do not overload the power
cord or adapter.
•
Ventilation: Ensure that the location planned
for the installation of the camera is well
ventilated.
Temperature: Do not operate the camera
•
beyond the specified temperature, humidity or
power source ratings. The operating
temperature of the indoor camera is between -
40 °C to +65 °C. Humidity 95% or less (non-
condensing) for both cameras.
•
Moisture: Do not expose the camera to rain or
moisture, or try not to operate it in wet areas.
Turn the power off immediately if the camera is
wet and ask a qualified service person for
servicing. Moisture can damage the camera
and also create the danger of electric shock.
•
Servicing: Do not attempt to service this
camera yourself. Please refer to the
instructions in this manual when removing the
camera cover. Refer all servicing to qualified
service personnel.
P/N 1014-All • REV A • ISS 17JUL20
9
https://firesecurityproducts.com/en/products/
video/cameras
Specifications
Electrical
Voltage input
Power consumption
Miscellaneous
Connectors
Operating temperature
Dimensions
Weight
Environmental rating
DE: Schnellinstallationsanleitung
Installationsumgebung
Beachten Sie beim Installieren des Produkts
folgende Faktoren:
•
Elektrik: Gehen Sie bei der Installation von
elektrischen Leitungen sorgfältig um. Die
Installation darf nur von geschultem
Fachpersonal durchgeführt werden. Schließen
12 VDC, PoE+ (IEEE
802.3at)
Max. 18 W
Network Port(PoE), Audio
In/Out, Alarm In/Out, BNC
Output, RS-485 Port, Aux
Power Out (2MP, 4MP
and 8MP only), 12 VDC
Power In
-40 to 65 °C
Ø 144 × 347 mm
2.45 kg
IP67; IK10
5 / 12
Publicidad
Tabla de contenido
