Filling The 2-In-1 Tank; Filling The Smartmix® Tank - Bissell PROHEAT PET TURBO 1799V Manual Del Usuario

Filling the 2-in-1 Tank

Our innovative 2-in-1 Tank system is designed with a heavy-duty flexible bladder inside for clean
water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula.
Dirty water will be pulled out of your carpets and collect around the outside of the bladder so that
clean and dirty water are always kept separate. This allows you to maximize tank space, yet only
carry one tank to and from the sink for filling and emptying.
1.
Press the Recline Pedal to
lay down the machine handle.
Lift the 2-in-1 Tank from the
base of the machine using the
carry handle on the tank.
Filling the SmartMix® Tank
The SmartMix feature automatically mixes clean water with the BISSELL® Advanced cleaning formula.
1.
Lift the SmartMix tank up
and out of the machine base.
WARNING
formulas intended for use with the deep cleaner.
2.
Carry the tank to the sink.
Set the tank on a flat surface
and rotate the handle forward
to unlatch and remove the lid.
Fill up the bladder with warm
water (140⁰F/60⁰C MAX). Do
not boil or microwave the
water as it can destroy the
bladder.
Optional: Add 2 ounces of
BISSELL Boost formula to the
bladder for even more cleaning
power.
2.
Fill the tank by first unscrewing the cap and insert. Fill with
water to the WATER line. Fill with formula to the FORMULA line.
Turn the cap and screw on tightly to secure. Return the tank to
the machine for a snug fit.
Note: Make sure the cap is properly seated to avoid leaking.
To reduce the risk of electric shock due to internal component damage, use only BISSELL cleaning
3.
Return the tank lid by
matching it to the tank edges.
The tank handle must be in
the forward position in order
to set the lid in place. Rotate
the handle back to secure the
latch.
Note: Remember to secure the
lid before picking up the tank.
BISSELL.com 5