Tabla de contenido
Publicidad
The displayed value is not correct, however, due to the magnetic properties of
■
the substrate.
When using the NFe measurement method, check id necessary whether the
■
substrate is not ferromagnetic, for example by carrying out an additional
control measurement using the Fe measurement method.
When using the NFe measurement method it is possible that either
■
numerical value is displayed when measuring on the Fe reference plate sup-
plied. This cannot be influenced and does not represent a quality defect.
Should the measurement results not be plausible despite the zero calibration,
■
deactivate the automatic mode changeover and carry out a zero adjustment in
both modes on the plates supplied.
Use a soft, damp cloth for cleaning.
■
In order to achieve reliable measurement results, clean the probe at regular
■
intervals and remove any soiling.
Do not throw the appliance away with normal household waste.
Dispose of the appliance via an approved waste disposal company or
via your local authority waste disposal facility. Observe the currently
valid regulations. In case of doubt, contact your waste disposal facility.
Dispose of all packaging in an environmentally sound manner.
Discharged batteries are hazardous waste.
On no account dispose of them with the domestic refuse; take then to
an approved collection point.
Maintenance / care
Environmental instructions
INFI
or a
17
Publicidad
Tabla de contenido
