Software Installation - LevelOne WAP-6015 Guía De Instalación Rápida

Software Installation

To login to the LevelOne AP, please perform the following steps:
1. Check Your Network Settings to login web UI
Please make sure your PC can get IP address automatically, so the router can
communicate with your PC during configuration.
 Select "Control Panel" > "Network Connections".
 Right click the "Local Area Connection" and choose "Properties".
 Select the TCP/IP protocol for your network card.
 Click on the Properties button. You should then see the following screen and
make sure you have selected "Obtain IP address automatically"
Launch a Web browser(Microsoft Internet Explorer 8 for example), enter the AP's
2.
Default LAN IP address 192.168.1.253 in the address bar, and then press Enter, as
shown in the following picture.
3. The Enter the default user name of admin and password of admin in theUser
Name and Password fields, click "OK" to access the AP's Web GUI.
NOTE: The device works in FIT AP Mode by default, you can goto "Start → Device
Mode" to change the Device Mode to FAT AP Mode.
5