MEI CASHFLOW 7000 Serie Manual De Instrucciones página 8

General LED Light Codes
On - Changegiver OK.
G
R A G
Blinks Off - Coin accepted / rejected.
G
G
Flashing - Changegiver in Menu mode
On – Changegiver inhibited by VMC.
A
Flashing - Changegiver requires attention.
A
Off - No Power to Changegiver.
(Check power looms are connected & ensure
power is switched ON)
Alternating - Changegiver Faulty
R G
(Remove from vending machine)
Amber LED Light Codes
If the amber LED flashes, this indicates that a fault has been detected on one of
the changegiver main modules. These types of fault can be rectified at the
machine and can be for example caused by; a coin jam; dirt built up; or the
cassette has been removed etc. The changegiver will also indicate the module
affected on its display.
Flashes
1 x
A
2 x A
3 x A
A
4 x
Cycles x 5 - Normal power up sequence.
Changegiver OK.
(Refer to Amber LED light codes)
Check Changegiver Module
Discriminator
Accept gate
Separator module
Dispenser module
Page 8 of 10