Product Description And Specifications - Bosch GEX 150 TURBO Professional Manual Original

OBJ_BUCH-522-004.book Page 11 Tuesday, August 30, 2011 10:26 AM
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic,
metal, filler as well as coated surfaces.
Machines with electronic control are also suitable for
polishing.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Bolt hole
2 Unlocking button
3 Mode selector switch
4 Sealing collar
5 Sanding plate
6 Screw for fastening the sanding plate
7 Allen key
8 Sanding sheet*
9 Handle (insulated gripping surface)
10 Auxiliary handle (insulated gripping surface)*
11 On/Off switch
12 Extraction outlet piece
13 Screw for extraction outlet piece
14 Thumbwheel for orbit frequency preselection
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools
Technical Data
Random Orbital Sander
Article number
Preselection of orbital stroke rate
Rated power input
No-load speed
No-load orbital stroke rate
Sanding plate speed in
operating mode 1
Orbit diameter
Sanding plate diameter
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 81 dB(A); Sound power level 92 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =4 m/s , K<1.5 m/s .
h
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
English | 11
GEX 150 TURBO
Professional
0 601 250 7..
W 600
-1
min 3100–6650
-1
min 6200–13300
-1
min 290–620
mm 4.5
mm 150
kg 2.4
/II
1 619 929 J36 | (30.8.11)