Declaration Of Conformity - Bosch GEX 150 TURBO Professional Manual Original

OBJ_BUCH-522-004.book Page 12 Tuesday, August 30, 2011 10:26 AM
12 | English

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Assembly
Before any work on the machine itself, pull the mains plug.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:
Material
– Paint
– Varnish
– Filling compound
– Filler
Expert for Wood
– All wooden materials
(e. g., hardwood, soft-
wood, chipboard, build-
ing board)
Best for Wood
– Hardwood
– Particle Board
– Building board
– Metal materials
– Automotive paint
– Masonry, stone
– Marble
– Granite
– Ceramic
– Glass
– Plexiglas
– Glass-fibre plastics
Replacing the Sanding Sheet
To remove the sanding sheet 8, lift it from the side and pull it
off of the sanding plate 5.
When attaching a new sanding sheet, remove any dust or
debris from the sanding plate 5, e.g., with a brush.
The surface of the sanding plate 5 is fitted with Velcro backing
for quick and easy fastening of sanding sheets with Velcro
adhesion.
1 619 929 J36 | (30.8.11)
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 01.09.2011
Application
For sanding off paint
For sanding primer (e. g., for removing brush dashes, drops
of paint and paint run)
For final sanding of primers before coating
For coarse-sanding, e. g. of rough, unplaned beams and
boards
For face sanding and planing small irregularities
For finish and fine sanding of wood
For pre-sanding
For shaping and braking edges
For final sanding and forming
For polish-sanding and rounding off edges
Press the sanding sheet 8 firmly against the bottom side of
the sanding plate 5.
To ensure optimum dust extraction, pay attention that the
punched holes in the sanding sheet match with the holes in
the sanding plate.
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
Grain size
coarse 40
60
medium 80
100
120
fine 180
240
320
400
coarse 40
60
medium 80
100
120
fine 180
240
320
400
coarse 80
medium 100
120
fine 180
240
320
400
very fine 600
1200
Bosch Power Tools