NOTE
If you wish, you can fit the filling acces-
►
sory 8 onto the lid 9 (Fig. 2):
Press the filling accessory 8 into the
–
cut-out on the lid 9.
Now you can add ingredients even during
operation.
Fig. 2: Fitting the filling accessory
7) Push the lid 9 onto the mixing bowl 6.
8) Turn the rotary switch 3 to the required
level (see the section "Speed settings").
After you have finished using your
appliance
1) Turn the appliance off using the rotary
switch 3 (Position "OFF").
2) Remove the lid 9 from the mixing bowl
6.
3) Push the release button 2
the swivel arm 1 to the highest position.
4) Remove the attachment 0 q w from the
drive shaft 7 by pushing the attachment
0 q w against the drive shaft 7 and
turning clockwise (direction
same time. Then you can remove the at-
tachment 0 q w.
5) Remove the mixing bowl 6 by turning it
anticlockwise and then pulling it upwards.
6) Clean the appliance (see section "Clean-
ing and care").
SKM 650 A1
Cleaning and care
►
ATTENTION! PROPERTY DAMAGE!
►
NOTE
►
Cleaning the housing
Wipe the housing with a damp cloth. For
■
stubborn soiling use a mild detergent on
the cloth. Wipe off any detergent residue
using a cloth moistened with clean water.
Then dry the appliance carefully.
Cleaning the accessories
Clean the mixing bowl 6, the lid 9, the
■
and move
filling accessory 8 and the kneading
hook 0, the whisk q and the beater w
in warm water with a little washing-up
liquid. Any residues can be removed with a
washing-up brush. Rinse all parts with warm
) at the
clean water and make sure that all parts
are dry before re-using them.
DANGER! RISK OF ELECTRIC
SHOCK!
Before cleaning the appliance, discon-
nect the power plug from the mains
power socket! There is a risk of electric
shock!
Never immerse the appliance in water
or any other liquid!
Do not use abrasive or aggressive clean-
ing materials. These may damage the
surfaces.
We recommend cleaning the appliance
directly after use. This makes food resi-
dues easier to remove.
GB │ MT
│
43
■