Object Lighting On /Off; Adjusting Image Control; Adjusting The Brightness; Displaying System Information On-Screen - Optelec ClearView+ Manual De Instrucciones

Optelec
When the auto-focus feature is in locked mode, a red light
on the central control button (mode / zoom) lights up. To
turn the auto-focus back on, simply press the auto-focus
button again. The red indicator light turns off.

Object lighting ON /OFF

Pressing this button for four seconds turns off the
object lighting. You can choose this option to make it
easier to read glossy articles such as magazines
and photos. Pressing the button once advances the viewing
mode by one position and turns the lights back on; or
pressing the button for four seconds turns the object lighting
back to the same viewing mode.

Adjusting image control

Press and hold the right or left side of this button to
adjust the image control. The image control may be
adjusted to make the characters or other on-screen
elements sharper, if they are not clearly visible.
Note: If the default control setting is changed on your
ClearView

Adjusting the brightness

Press the left or right adjustment button while
pressing the auto-focus button to adjust the
brightness.
Note: If the default control setting is changed on your
ClearView
control.

Displaying system information on-screen

The magnification factor and the system configuration
(system modules) can be displayed on-screen. Press
16
+ , pressing this button adjusts the brightness.
+ , pressing these buttons adjusts the image
ClearView +
English