Safety Notes; Description Of The Machine - Proxxon OFV Manual Del Usuario

GB
PROXXON MICROMOT OFV
Preface
Dear customer!
Slots, grooves and edges can be realised easily
and without problems using the PROXXON
MICROMOT OFV router attachment together with
a suitable PROXXON milling unit.
This manual encompasses the following:
• Safety instructions,
• Operation and maintenance,
• Spare parts list.
Use of this manual
• makes it easier to become acquainted with the
device,
• prevents malfunctions due to improper han-
dling and
• increases the service life of your device.
Always keep this manual close at hand. Only
operate this device with exact knowledge of it
and in compliance with this manual.
PROXXON is not liable for the safe function of
the device
• in the case of handling that does not comply
with the usual intended use,
• where it is used for other purposes not men-
tioned in the manual,
• where the safety instructions are not heeded,
Guarantee claims will not be entertained in the
case of operating errors and inadequate mainte-
nance.
It is imperative that the safety instructions are
complied with for your own safety.
Use only original PROXXON spare parts.
We wish you the very best of success with the
router attachment.
We reserve the right to make further develop-
ments in the interest of technical progress.

Safety notes:

Read and observe the following safety instruc-
tions carefully before using the device. This
enables you to avoid injury to yourself!
• Avoid untidiness in your working area.
• Do not wear loose clothing or jewellery when
working with rotating tools.
• Secure or clamp the workpiece firmly.
• Check the device for damage prior to use and
replace defective parts.
• Keep children away from the working area.
• Wear protective glasses.
• Do not overload the machine.
• Do not use tools which are too weak for heavy-
duty work.
• Keep unused tools in a closed room away from
children.
• Change blunt tools.
• Clean the device thoroughly following work.
• Use only accessories and spare parts recom-
mended in this manual or by the manufacturer.
Key (Fig. 1)
1. Base plate
2. Milling motor bracket
3. Clamping bar for milling motor
4. Parallel stop
5. Circle attachment
6. Guide column
7. Threaded spindle, depth control
8. Knurled nut for depth control
9. Locknut for depth control
11. Centring point
12. Pressure spring
13. Clamping screw for depth control
14. Clamping screw for motor clamping
15. Locking screw for guides

Description of the machine

The OFV router attachment is a practical acces-
sory which, in combination with a PROXXON
Micromot drill grinder, enables the manufacture of
wooden toys, model furniture, fine profile strips
and mouldings, picture frames and much, much
more.
Depending on the task involved, the OFV can be
guided free-hand for this purpose or, alternatively,
a stop or template can be used.
- 7 -