Pixel Voical Air Guia Del Usuario página 7

Troubleshooting
Check the signal channel number of the
transmitter shall be the same with that of the
receiver.It may be interfered, please change the
signal channels of the transmitter and the
No signal/
receiver. The distance is beyond the service
there
range, please reduce the service distance;
is noise
effective outdoor service distance is 50 meters, if
there is shelter or for indoor use, the working
distance will be decreased.
When
The microphone is a highly sensitive pick-up,
speaking please adjust the distance between the
loudly microphone and the sound source.
The output volume of the transmitter is too much,
please adjust the sensitivity DB level. Check if the
transmitter or the receiver is in mute state, if it is in
The sound
mute state, "MUTE" is shown on the display
is distorted.
screen and the power key can be pressed once to
No sound/
deactivate the mute. Check if the microphone plug
very small
of the transmitter or the output plug of the receiver
is completely inserted into the socket. Check the
setting of the volume parameter.
The service distance may be affected because the
transmitter and the receiver are blocked by the
building.The transmitter and the receiver shall not
soundShort be covered by the objects as far as possible in
wireless order to facilitate signal transmission.In a crowded
environment, the human body may attenuate the
service
radio waves so that the transmitter and the
distance
receiver shall not be blocked as far as possible.It
may be interfered, please change the signal
channels of the transmitter and the receiver.
Check if the windproof cover of the microphone
Large
has been installed, and please adjust the
wind noise
sensitivity DB level.
8 9