Tripp-Lite B126-1D1-WHD1 Manual Del Propietário página 6

Installation
Notes:
• Make sure all equipment being connected is powered off prior to installation.
• Make sure to position the IR cables near the source device and HDMI display for
best results.
• If the wireless signal is obstructed by walls (especially brick or glass) or other
sources of interference, the quality and distance of the signal will likely be re-
duced.
1
HDMI Source Device
Mini Transmitter Unit
2
IR-OUT Cable
Mini Transmitter Unit
1
Connect the built-in HDMI connector on the Mini Transmitter Unit to
the HDMI source device.
Note: If experiencing a weak signal or signal loss, use the Right-Angle HDMI
Adapter to connect the Mini Transmitter Unit to the HDMI source device. The
Right-Angle HDMI Adapter will put the Mini Transmitter Unit in a vertical position
to strengthen the signal.
8
5
Receiver
Unit
USB Wall Charger
6
HDMI Display
HDMI Cable
6
7
IR-IN Cable