Please Read These Operating Instructions; Operating Parts; Technical Data; Notes On Operating Instructions - Brill Electro 380 Manual Del Usuario

Electric Hand Lawnmower 380

1. Operating parts

1 Cutting cylinder
(fig. A/S pos. 1)
2 Lower blade (fig. S pos. 2)
3 Upper section of the guide
handle (fig. A pos. 3)
4 Middle section of the guide
handle (fig. A pos. 4)
5 Lower section of the guide
handle (fig. A pos. 5)
6 Wing nuts with bolts
(fig. A pos. 6)
7 Cable guide (fig. A pos. 7)
8 Cutting height marking
(fig. O1 pos. 8)

2. Technical data

Width of the cutting cylinder
Weight
Working area related emission
characteristic value L
Guaranteed noise level L
Measured noise level L
Hand-Arm vibrations a

3. Notes on Operating Instructions

Please read these operating
instructions carefully. Use these
operating instructions to
familiarise yourself with how
to operate and control your
Hand Lawnmower and its proper
use.

4. Using your Electric Hand Lawnmower correctly

The Brill Electric Hand Lawn-
mower 380 is designed for cut-
ting lawns in and around the
garden. It is not designed for
use in public facilities, parks,
sporting grounds, on roads, in
agriculture or forestry.
(fig. A – T)
9 Fixing nuts (fig. A/N pos. 9)
10 Opening for snug from
or on handle bolts
(fig. D pos. 10)
11 Handle bolts (fig. D pos. 11)
12 Adjusting handles
(fig. O pos. 12)
13 On/off switch
(fig. A pos. 13)
14 Release knob
(fig. Q pos. 14)
15 Starting handle
(fig. Q pos. 15)
16 Grass catcher (accessory)
(fig. R pos. 16)
38 cm
ca. 11 kg
1)
77 dB (A)
p A
2)
91 dB (A)
WA
2)
89,3 dB (A)
WA
1)
< 2,5 m/s
vhw
Never allow children or
A
other persons who are
not familiar with these operating
instructions to use your Hand
Lawnmower. Local laws may
specify a minimum age for users
of this type of gardening equip-
ment.
It is essential to observe the
manufacturer's operating in-
structions to ensure the unit's
proper functioning.
The operating instructions
also contain advice for service,
maintenance and repair.
2
17 Holders for grass catcher
and handle (fig. R pos. 17)
18 Hooks for grass catcher
(fig. R pos. 18)
19 Node (fig. E pos. 19)
20 Screw connection (fig. J/K)
21 Cable holder (fig. G)
22 Cable lock (fig. P pos. 21)
23 Plug (fig. P pos. 23)
24 Thickness gauge
(fig. S pos. 24)
25 Hexagon thread bolt
(to adjust cutting tool)
(fig. S pos. 25)
Measuring method according to
1) 2)
EN 836 2000 / 14 / EG
Never mow your lawn if other
people, especially children, and
pets are nearby.
The user is responsible for all da-
mage, accidents, and injuries
that occur to third parties or their
property.
We recommend supplying
your Hand Lawnmower with a
maximum operating current of
30 mA via a residual current-
operated protective device.
GB
19