Tripp-Lite B126-1A1-U Manual Del Propietário página 4

Extender Kit Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6
cable must be used. The use of stranded wire Cat5e/6 cable or cable with a
gauge size higher than 24 AWG will result in shorter extension distance. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
3. Make sure the power to all devices you are connecting is turned off prior to
installation.
Blu-ray™
PLAYER
1. Connect the built-in HDMI cable of the transmitter unit to the HDMI
source.
2. Optional: Connect an HDMI monitor to the LOCAL port on the
B126-1A1-U transmitter using a Tripp Lite P568-Series HDMI Cable.
3. Connect the included USB Micro-B Cable between the transmitter
unit and a USB port on the source or a USB wall outlet.
4. Connect the RJ45 port on the transmitter to the RJ45 port on the
receiver using Cat5e/6 cable.
Note: See the installation diagrams for maximum extension distance and video
resolutions.
5. Connect the built-in HDMI cable of the receiver unit to an HDMI
monitor input port.
6. Connect the included USB Micro-B cable between the receiver unit
and a USB port on the display or a USB wall outlet.
16-12-182-9334F6.indb 4
2
HDMI
DISPLAY
3
1
4
24 AWG SOLID-WIRE
CAT5/6 CABLE
Up to 125 ft. at 1080p
4
6
5
HDMI DISPLAY
1/4/2017 4:40:05 PM