Tripp-Lite B127-1A1-HH Manual Del Propietário página 11

Standard Extender/Splitter Installation
9. Turn on the power to the HDMI source. The (orange) RJ45 LEDs will
illuminate on the B127-002-H and B127-004-H to indicate the
unit is receiving a signal from the source. Additionally, the OUTPUT
(orange) LED will illuminate for each port signal connection.
10. The RJ45 (orange) LEDs on the B127-100-H and orange LED on the
B127-100-H-SR will illuminate to indicate a signal is being received
from the extender/splitter. The screen should now display on the
connected monitors.
Splitter Daisy-Chain Installation
(B127-004-H only)
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire
cabling.
3) Using the B127-100-H, a 4K/60 Hz signal can be extended up to 125 ft. (38 m)
from the source. Using a B127-100-H-SR, a 4K/60 Hz signal can be extended
up to 50 ft. (15 m) from the source.
1-427-933919.indb 11
11
3/18/2019 4:56:29